Technology Day

Feb 15, 2024, 3:31 PM
Recently, we had the pleasure of opening the doors to our R&D laboratory at Vestas aircoil for a group of students from the 3rd year at HTX (Higher Technical Examination) at UCRS (Education…

Topic: Towards Applied Architected Materials

Dec 11, 2023, 4:26 AM
January 16, 2024 Unlock the Potential of Architected Materials: A Journey into Advanced Materials Science On January 16, we are joining an inspiring master class session titled…

Memorable visit

Nov 10, 2023, 10:59 AM
Friday we had a very memorable visit from Laurids Knudsen and Flemming Grunnet together with Hans Laurids Pedersen and Journalist Katja and Hans Henrik. The first mentioned Gentlemen are an…

The second patent in 2023

Nov 6, 2023, 10:52 AM
Today we got the news that the second patent of our R&D colleagues Frank Nielsen and Claus Ibsen have been published. Time for another little celebration. If we have a KPI in…

Topic: Metal forming and sheet metal

Sep 25, 2023, 3:29 PM
Scandinavian Sheet Metal Forming Material testing & heading for More Sustainable Materials and More Sustainable SC's Vestas aircoil welcomes Mats Sigvant, Volvo Cars and Alexander…

Visit from Aarhus University

Sep 7, 2023, 9:28 AM
We got a chance to invite Prasad Talasila from Aarhus University to our R&D Laboratory today. We met at the introduction to the DIGITbrain Project at DTL…

Two new Inventors

Sep 5, 2023, 9:23 AM
ADDING 'INVENTOR' TO THE JOB DESCRIPTION - Innovating through Patenting We are excited to introduce an extraordinary breakthrough in the realm of air-cooling technology, born from the…

Visit from OTV Plast A/S

Aug 10, 2023, 1:21 PM
Today we had a visit from Henrik Jylov and Claus Boysen from OTV Plast A/S which developed into a very inspiring discussion on added manufacturing, recyclability and the use…

New tools bring new knowledge

Aug 1, 2023, 4:00 PM
In our continuous pursuit of enhancing efficiency and advancing our knowledge-based development process, we require new tools at Vestas aircoil’s Competence Center. Just this week, we…

Brownie Bee project

Jun 15, 2023, 12:55 PM
Yet another day with good people visiting us. Christian Bladt Brandt and Morten Bormann Nielsen from Danish Technological Institute gave us an introductory course…

Meeting with Lars Damkilde from Aarhus University

Jun 13, 2023, 12:54 PM
Meeting up with Lars Damkilde, Professor at Aarhus UNivesity, and discussing Digital Twin and Model updating within a project supported by Innovation Fund Denmark has been a dream…

New R&D Heat Exchanger Engineer

Jun 1, 2023, 12:51 PM
Lasse Uhd Christensen have just started as our new R&D Heat Exchanger Engineer. We are sure we are going to do clever stuff together with the rest of the  team and the company.…

Kick-off meeting in CP-Sens

May 4, 2023, 9:49 AM
We have held the kick-off meeting in our new Grand Solution project partially funded by Innovation Foundation Denmark called CP SENS. For the next 3 years we are going to make a difference with…

Visit from Hottinger Brüel and Kjær

Apr 26, 2023, 3:33 PM
Yesterday we had a wonderful afternoon together with Dmitri Tcherniak and his colleagues Bin Liu and Lukas Träger from HBK - Hottinger Brüel & Kjær as they visited our…

Applied Innovation

Mar 15, 2023, 9:35 AM
So many good people are visiting our R&D Laboratory -Center of Excellence these days. Today Karl Brian gave an introduction of our company and the innovation challenge to a group…


Mar 14, 2023, 9:28 AM
REAL WORLD EVENTS BEAT TEXT BOOKS ANY DAY. Eight students at Syddansk Universitet - University of Southern Denmark studying Global Management & Manufacturing are doing their 4th…

Cooler preparation for Digital Twin campaign

Mar 13, 2023, 9:33 AM
Bilal is preparing a cooler for what is to be our dedicated digital twin campaign. We are very happy that we can collaborate with Lars Bo Andersen (Alfa Laval Aalborg) and his…

Topic: Large Structure Production Center

Jan 31, 2023, 4:16 PM
This week we had a greatly inspiring visit in our R&D Laboratory -center of excellence as Luis David Avendaño-Valencia and his PhD-student Jens Kristian…

Sensor testing

Jan 18, 2023, 4:24 PM
We, at Vestas Aircoil, are currently working towards digitalisation through various non-funded and funded projects in collaboration with the industries and academia. One of such projects is to…

Visit from our CEO

Jan 18, 2023, 4:20 PM
Just before Christmas our CEO Michael Døj visited our R&D Laboratory -Center of excellence. We showed our newly acquired 3D printer (from 3D Eksperten) and discussed…

Workshop with FORCE Technology

Dec 19, 2022, 4:13 PM
It is a necessity to be prepared for future changes in the era of digitalisation, which is why we, at Vestas Aircoil A/S, strive towards becoming the first manufacturer to enable complex digital…

InDEStruct: engineering advanced heat transfer systems

Oct 13, 2022, 4:34 PM
Optimisation of a charge air cooler. Read about our InDEStruct project and the multi-disciplinary design optimisation framework of Atul Singh in the latest issue of Open Access Government. where…

Collaborating with Academia

Oct 7, 2022, 12:36 PM
Our fantastic new eBook is out now on Open Access Government. If you are looking for a one-stop insight into our R&D plans and collaboration with high ranking Universities this is the…

Topic: Multiphysics simulation and optimisation

Oct 6, 2022, 3:22 PM
Today we had a visit from the always inspiring Joe Alexandersen from Syddansk Universitet - University of Southern Denmark. He introduced us to the present status of Multiphysics…

Closing the gap between science and industry

Sep 9, 2022, 12:49 PM
New article in the very first issue of Aether. The European Union uses a technology readiness ladder to decide where on that platform a project or technology is. It was originally developed…

Welcome to our new R&D Vibration Engineer

Sep 6, 2022, 4:30 PM
A warm welcome to Mr Bilal Ali Qadri who started in our R&D group this month. This is a key strengthening of our team competences.  He holds a PhD in Vibration-based structural…

Developing high-performance heat exchangers for low-emission power systems

Aug 8, 2022, 9:20 AM
New article in issue 14 of the European Dissemination Media Agency. In the quest to lower emissions from engine systems, heat exchangers are a key enabling technology for low-emission power…

How can we bridge the industrial-academic gap?

Aug 2, 2022, 3:29 PM
New article in Open Access Government issue 35. Vestas aircoil A/S values the potential of being part of the Horizon 2020 project InDEStruct. Besides the project outcome, it has also been a…

Cooler prepared for model update.

May 23, 2022, 4:08 PM
We have produced a cooler with quite a few temperature sensors mounted (thermocouples). This is a small but important step in our drive towards digital twins of our coolers. The sensors are…

Open Position: R&D Vibration Engineer

May 9, 2022, 2:08 PM
We have an open position ias R&D Vibration Engineer in our Research & Development department in Denmark. Looking for a new colleague with expertise in vibrations both from a theoretical…

Bridging the gap between academia and industry

Mar 22, 2022, 12:54 PM
Vestas aircoil are quite serious about our collaboration with Universities. We believe in taking advantage of the latest research to improve our product to our customers. Lately we have…

Visit from Aarhus University

Feb 4, 2022, 1:39 PM
Today we had some very interesting visitors to our R&D Laboratory - Center of Excellence. Dr. Xuping Zhang from Aarhus University came together with his 2 PhD students Zhengxue and…

Welcome to our new R&D Heat Exchanger Engineer

Jan 21, 2022, 12:15 PM
Yet another big smile. This month I was so fortunate to be able to welcome Khem Gautam to our R&D group. Our new Heat Exchanger expert. Khem comes from a position as postdoc and is an expert in CFD…

Material Inspection

Dec 16, 2021, 3:34 PM
We perform material inspection of the materials for our charge air coolers in our R&D Laboratory -center of Excellence. To ensure that we have the required quality to build the coolers  Today we…

Welcome to new R&D Lab Scientist

Dec 13, 2021, 2:33 PM
We are very happy to be able to welcome Mr. Karl Brian Nielsen to our R&D Department. As a very experienced engineer in the field of Product, Process and Production Design and Management he…

InDEStruct article

Dec 7, 2021, 9:48 AM
We have published the latest article in the series of four background article, which is featuring the young talents which are part of our InDEStruct project. The article can be read on our…

Team Vestas aircoil DK

Aug 23, 2021, 6:56 AM
Team Vestas aircoil DK successfully completed the 4 hour hike along Ringkøbing Fjord. Walking in the beautiful and lovely scenery between local town Skaven and Bork was a huge mind booster.…

Kevin Jose is preparing a metamaterial in our R&D Lab –Center of Excellence

Jul 10, 2021, 7:01 AM
Kevin Jose is preparing a metamaterial in our R&D Lab –Center of Excellence. The metamaterial is part of our next delivery for the InDEStruct project and is manufactured using a…

Collaboration between InDEStruct and our Industrial Postdoc project comMEC in our R&D Lab -Center of Excellence

Jul 1, 2021, 7:05 AM
Collaboration between InDEStruct and our Industrial Postdoc project comMEC in our R&D Lab -Center of Excellence.  It is a good experience to see two projects benefit from each other.…

Articles of the four European industrial PhD fellows

Jun 15, 2021, 7:26 AM
We are very happy that we can present the next article in the series of background articles of the four European industrial PhD fellows, which is part of the InDEStruct project. This time the…

Our R&D lab - Center of Excellence is in use!

Jun 1, 2021, 7:29 AM
Our R&D lab - Center of Excellence is in use! We produce coolers, which have to last long. So it is important to understand the environmental exposures the coolers will experience while…

The distinguished people from TAGARNO came to R&D Lab -Center of Excellence

May 15, 2021, 7:34 AM
We are excited to announce the delivery of our new microscope. The distinguished people from TAGARNO came to install our new Tagarno Prestige microscope in our R&D Lab -Center of Excellence.…

Starting to move our new and old equipment into the R&D Lab -center of excellence

May 1, 2021, 7:38 AM
The wait is almost over. Almost. We are currently starting to move our new and old equipment into the R&D Lab -center of excellence. Previously it was used for welding, grinding and cutting,…

Introducing our new premises and the perfect scene

Mar 1, 2021, 7:41 AM
Uninspiring emptiness or possibilities galore? Since our last post we have already had a moving day –this is what happens when you are inspired. Introducing our new premises and the…

New success for Vestas with Chinese owners

Oct 12, 2018, 12:10 PM
For a European origin company to be winning orders from Chinese ship management companies, right under the nose of of the local “grey market” is something we are very proud of.…

Vestas aircoil supports new STX engine

Sep 3, 2018, 8:47 AM
Vestas support STX new engines Engine designed by MAN, manufactured by STX, and equipped with a charge air cooler by Vestas aircoil. A truck with 185 BHP delivers an engine with…

Huge marine diesel engine with charge air cooler from Vestas Aircoil

Sep 1, 2018, 12:05 PM
One of the larger marine diesel engines with charge air coolers made by Vestas aircoil! The engine is an MAN Diesel 12K98 ME-C9.2. Max RPM is 72/min, which delivers an output of…